The polishing liquid is a water-soluble polishing agent without any additives of sulfur, phosphorus and chlorine. The polishing liquid has good degreasing, anti-rust, cleaning and brightening properties, and can make metal products exceed the original luster. Stable performance, non-toxic, White Zirconia Ceramic no pollution to the environment.
According to the material, it is mainly divided into diamond polishing liquid, silicon oxide polishing liquid, cerium oxide polishing liquid, alumina polishing liquid and silicon carbide polishing liquid. The objects include silicon wafers, precision optical devices, sapphire wafers, optical lenses, glass-ceramic substrates, crystal surfaces, integrated circuit photomasks, optical instruments, hard disk substrates, magnetic heads, ceramics, optical fiber connectors, etc. Grinding and polishing. Polymer elastic soft abrasives Polymer elastic soft abrasives, microporous oily abrasives and suspension abrasives are special high-density molecular polymer elastic materials for combined Machinable Ceramic grinding applications. The polymer structure of these elastic soft abrasives has strong swelling ability, strong adhesion to grinding media and helps improve grinding efficiency. Soft abrasives can process high and low hardness tungsten steel, alloy steel, copper, aluminum, ceramics, glass and other materials, and are especially effective for inner holes or outer surfaces.
CNC machining produces parts with excellent mechanical properties, precision and repeatability using metals and plastics. There are 3-axis and 5-axis CNC milling. The quasi-order surface finish shall be referred to as the machined surface finish and a finish of approximately 125 RA ΜIN (3.2 RA ΜM) is required. Slight tool marks visible on the part are acceptable. All sharp edges and burrs will be removed. If any form of threading (internal or external), any non-standard tolerance or any non-standard surface finish is required, it must be Macor Ceramics clearly indicated in the technical drawing. Unless otherwise specified on the technical drawing, all parts are machined to the ISO 2768 tolerance standard: many parts produced by this technique are made of plastic, which has its advantages but makes the parts susceptible to shock, wear and tear and other external factors. Metallic coatings can add strength and durability by providing a protective outer layer. For those hard-to-reach places, sandblasting is more effective. In this method, you use an airbrush to spray finely reground thermoplastic on the surface, removing imperfections and smoothing the surface in a manner similar to sanding. However, sandblasting can be done in less time and can reach inside channels and other tricky spots. Like sanding, sandblasting helps to enhance the aesthetics of the product. It will produce a smooth matte finish. It is also an effective way to smooth out the material to allow it to adhere properly before applying the coating. If using sandblasting, be sure to start with a low pressure and gradually increase the pressure as needed to avoid staying in any one area for too long.
How are ceramics polished?
2022 07/11